Table 1 Input Electrical Characteristics（輸入特性） Input voltage range 輸入電壓 90Vac to 264Vac Normal voltage range標稱輸入 100Vac to 240Vac Frequency range 頻率范圍 50Hz/60Hz 5% Max input ac current 最大輸入電流 4Amax at full load condition Inrush current (cold start)浪涌電流40Atyp peak, 120Vac;60Atyp peak, 220VacAC-DCEfficiency (full load) 效率90%min at 110/230Vac input 94%Mmax at 110/230Vac inputDC-DCEfficiency (full load) 效率 98%MAX 36V 5%input 4*(32V 1V ) 1.25A 100mALeakage Current 泄漏電流Less Than 0.75mA, 240Vac input額定功率240WInput Fuse 輸入保險T6.3AH/250Vac 1.2 Output Electrical Characteristics（輸出特性）1.2.1 Table 2 Output Voltage Current Regulation（輸出電壓電流調整率）Output Voltage輸出電壓Regulation調整率Min. current最小電流Rated current額定電流Peak current峰值電流+36V 5%0.0A6.6A7.0A Note:* The testing of peak current shall be performed under other dc output load rating and the peak current pulse width within 100ms conditions.峰值電流的測試條件是其它負載為額定負載，且脈寬小于100毫秒。 When is tested(power test only),testing shall be performed with rated load current of firstly, and then with load current of inverter. 在測試時（僅限Power測試），的額定負載電流，后帶的負載電流。