品牌: MMT 型號: JR-N 宣傳資料 Promotion Material 產 品 說 明 Product Description 齒輪計量泵介紹 Introduction of gear metering pump 九潤系列齒輪計量泵泵體為304不銹鋼或優質含鉻碳素鋼（低配置）；齒輪為馬氏體不銹鋼或非金屬耐磨材料；軸為優質碳素鋼或馬氏體不銹鋼。九潤系列齒輪計量泵的齒輪和軸都經過嚴格的調質及表面硬化處理，硬度高，耐磨性極好。 Jiurun Series Gear Metering Pumps have pump body made of 304 stainless steel or quality carbon steel containing chromium (low disposition); gear made of Martensite stainless steel or nonmetallic wear resistant materials; axle made of quality carbon steel or Martensite stainless steel. The gears and axles of Jiurun Series Gear Metering Pumps have undergone strict tempering and surface hardening processing, with high rigidity and good wear resistance. 一、九潤系列齒輪計量泵使用條件 ： Ⅰ. Service Conditions of Jiurun Series Gear Metering Pumps: 粘度：九潤系列齒輪計量泵最高粘度4 105Cps； Viscosity: Maximum viscosity of Jiurun Series Gear Metering Pumps as 4 105Cps; 溫度：九潤系列齒輪計量泵最高工作溫度200℃（如溫度超過90℃，請在選型時說明）； Temperature: Maximum working temperature of Jiurun Series Gear Metering Pumps as 200℃ (please indicate when selecting type if temperature exceeds 90℃); 流量：2-8L/min（可調） ; 壓力：0.2-0.6Mpa； Flow rate: 2-8L/min (adjustable); Pressure: 0.2-0.6Mpa; 九潤系列齒輪計量泵典型輸送： Typical conveying of Jiurun Series Gear Metering Pumps; 助磨劑、研磨劑、水玻璃、油墨、樹脂、油料、顏料、添加劑、黏合劑、泡沫材料、瀝青、渣油等 Grinding additive, abrasive, water glass, printing oil, resin, oil, pigment, additive, adhesive, foamed material, asphalt and residual oil, etc. 二、九潤系列齒輪計量泵產品優點： Ⅱ. Product Characteristics of Jiurun Series Gear Metering Pumps: 1、精度高，保證流量精確、無脈動和可重復性。 1. High precision to ensure precise flow rate, no pulsation, and repeatability. 2、設計獨特，電動機和計量泵之間采用柔性驅動聯接，消除了電機和計量泵之間因?qū)χ姓`差而對計量準確性的影響，同時也防止了電動機把振動傳給計量泵。 2. Unique design with flexible drive connection between electrometer and metering pump to eliminate impact of centering error between electrometer and metering pump on the precision of metering and to prevent electrometer from conveying vibration to metering pump. 3、使用壽命長，過流部件采用優質材料，經過嚴格的調質和表面硬化處理，硬度高，耐磨性好； 3. Long service life, with flow passage components made of quality materials under strict tempering and surface hardening processing, with high rigidity and wear assistance. 4、維護方便，采用前后開門設計，拆裝容易，維修方便，節約維修成本和維修時間。 4. Convenient maintenance, front and back opening design, easy disassembly, convenient maintenance, saving maintenance cost and maintenance time. 5、密封多樣，針對不同需求和物料的特性，可選用單唇型密封、雙唇型